Christmas delivery: order by Tue, Dec 15 for FREE shipping (in-stock items) - faster shipping at checkout through Dec 23
Sign In / Register Shopping Cart0 My Wish Lists

Bangle Size Guide: How to Measure Your Hand for a Bangle

Updated November 2026. By the Jewelry by Sweet Pea team, a family-owned jeweler since 2008.

The short answer: a slip-on bangle has to pass over your hand, so measure around the widest part of your hand with your thumb tucked into your palm, then choose a bangle of that length or the next one up. An 8 inch bangle is about 2.55 inches (65 mm) across the inside. A hinged bangle or a cuff opens, so size it by your wrist plus about half an inch.

Chart of bangle sizes drawn as nested circles in true proportion, with a US quarter for scale: 7 inches around is 2.23 inches or 57 mm across the inside, 7.5 inches is 2.39 inches or 61 mm, 8 inches is 2.55 inches or 65 mm, and 8.5 inches is 2.71 inches or 69 mm.
Drawn in true proportion to each other. Your screen size will vary, so use the quarter or a ruler to compare.

A chain bracelet wraps around the wrist, but a rigid bangle has to get past the hand first. That is why a bangle that matches your wrist can still be too small to put on. This guide shows which measurement to take for each kind of bangle, and how to turn it into a size.

Which kind of bangle is it?

  • Slip-on bangle: a closed circle with no clasp. It slides over the hand, so size it by your hand.
  • Hinged bangle: opens on a hinge and closes with a catch. It goes around the wrist, so size it by your wrist. Many are oval, which helps them sit flat and not spin.
  • Cuff: has a gap. Slip it on from the side of the wrist, where the wrist is narrowest, then turn it. Size it by your wrist.
  • Flexible, stretch and adjustable bangles: these give a little, so the size is more forgiving. Check the listing for the length.

The product title usually says which kind it is. The Clasp line in the product details helps too: a slip-on bangle or cuff shows no clasp.

Three simple pictures: a slip-on bangle is a closed circle sized by the hand, a hinged bangle opens on a hinge and is sized by the wrist, and a cuff has a gap and is sized by the wrist.

How do I measure my hand for a slip-on bangle?

  1. Hold your hand as if you were sliding on a bangle: fingers together, and the thumb tucked across the palm toward the little finger.
  2. Wrap a flexible tape measure, a strip of paper or a piece of non-stretchy string around the widest part of the hand, over the knuckles and the base of the thumb.
  3. Keep it snug but not tight. If you used paper or string, mark where it meets, lay it flat and measure to the mark with a ruler.
  4. Write down the number in inches. That is the distance around the inside of the smallest bangle that will pass over your hand.
  5. Choose a bangle with that length, or the next length up. Measure the hand you will wear it on.
A hand held upright with the fingers together and the thumb tucked in, and a plain white tape wrapped around the knuckles at the widest part.
Illustration: tuck the thumb in and measure around the widest part of the hand.

Bangle size chart: around and across

Our listings give a bangle's size as a length in inches, the same way as a bracelet. For a rigid bangle, think of that length as the distance around the inside. If you have a bangle that already fits, you can also measure straight across the inside, from inner edge to inner edge, and use this chart to find its length.

Length (around the inside)Across the inside, inchesAcross the inside, mm
7 in2.23 in57 mm
7.25 in2.31 in59 mm
7.5 in2.39 in61 mm
7.75 in2.47 in63 mm
8 in2.55 in65 mm
8.25 in2.63 in67 mm
8.5 in2.71 in69 mm

The numbers come from simple math: the distance across is the distance around divided by 3.14. One inch is 25.4 mm.

How do I size a hinged bangle or a cuff?

These open, so your hand does not matter. Measure your wrist just above the wrist bone, add about half an inch, and choose the closest length. Our bracelet size guide shows how to measure a wrist step by step. On our hinged bangles, 7 inches is the length listed most often, and you will also see lengths from 6.5 to 8 inches.

A cuff should hug the wrist without pinching. Try not to bend a cuff open and closed each time you wear it, because bending metal back and forth weakens it.

How should a bangle fit?

  • A slip-on bangle should take a gentle push to get over the hand. If it drops on with no effort, it can slide off again when your hand is relaxed.
  • A hinged bangle should move a little on the wrist and should never pinch when you close the catch.
  • Wide bangles fit snugger. A wide or thick bangle takes up more room than a thin one of the same length. If you are between two lengths, choose the longer one for a wide bangle.
  • A rigid bangle is hard to change later. A closed circle usually cannot be made larger or smaller the way a chain can, so measure before you choose.

Sizes for children and gifts

Children's and baby bangles are much smaller. The ones we carry are usually listed at 5 to 6 inches. Measure the child's hand or wrist the same way and compare it with the length in the listing.

Buying a surprise? Measure straight across the inside of a bangle the person already wears, and find it in the chart. Our blog has more tips on guessing a size for a surprise gift. If you cannot measure, a hinged bangle or a cuff is the more forgiving choice.

Finding the size on our pieces

Look for the Length line in the product details. Some listings also put the length in the product title. If a listing does not show a length, please ask us before you order.

Browse our bangles, cuff bracelets, children's bracelets and all bracelets. Our blog compares gold bracelets and gold bangles for daily wear.

More jewelry guides

See all our jewelry guides

Bangle Size Questions

What size bangle do I need?
For a slip-on bangle, measure around the widest part of your hand with your thumb tucked into your palm, and choose that length or the next one up. For a hinged bangle or a cuff, measure your wrist and add about half an inch.
How do I measure my hand for a bangle?
Bring your fingers together and tuck your thumb across your palm, as if you were sliding a bangle on. Wrap a tape measure, a strip of paper or non-stretchy string around the widest part of the hand, over the knuckles, and note the inches.
How wide across is an 8 inch bangle?
A bangle that measures 8 inches around the inside is about 2.55 inches, or 65 mm, across the inside. A 7 inch bangle is about 2.23 inches, or 57 mm, across.
Is a bangle the same size as a bracelet?
Not always. A chain bracelet is sized by the wrist. A slip-on bangle has to pass over the hand, so it is usually longer than the chain bracelet the same person wears.
How should a slip-on bangle fit?
It should take a gentle push to get over the hand, then move freely on the wrist. If it slides on with no effort, it can slide off again.
Can a bangle be made bigger or smaller?
A rigid bangle usually cannot be changed the way a chain can, so it is best to measure first. Flexible, stretch and adjustable styles are more forgiving.
Can you help me choose a size?
Yes. Text us at (407) 279-1719 or email store@jewelrybysweetpea.com and we'll be glad to help.

Found Your Size?

Shop Bangles

Gold and silver bangles: slip-on, hinged and cuff styles.

Shop Bangles